Diamond Education, Diamonds Shapes

Pear Cut Diamond: Tips For Picking the Perfect One

Pear Cut Diamond - Gemistone

The Pear Shaped Diamond is also called a teardrop diamond because of its shape. The pear cut is a combination of a round brilliant with a pointed marquise diamond. This beautiful, elongated diamond has a round side and a pointed side. The length of the pear cut gives the fingers a long and slender look.

The pear shaped cut is an interesting choice for someone who likes the twinkling brilliance of the traditional round brilliant but needs a slightly less mundane shape.

What Does the Pear Shaped Diamond Meaning?

The Pear Cut diamond is also called a teardrop diamond because of its distinctive shape. The combination of these two cuts is therefore called pear or teardrop. Pear cut diamond is a combination of a round brilliant diamond with a pointed marquise diamond. This beautiful, elongated diamond has a round end and a pointed end.

The pear cut diamond should be cut symmetrically. The rounded corners must be equal to each other and must not have direct facets. If the point of the pear cut diamond points towards your nails, your fingers will appear longer and narrower. This also occurs with the oval and the marquise cut diamonds. For that reason, these shapes are usually used in engagement rings. 

Thanks to its unique shape, the pear diamond is a very popular choice for all kinds of diamond jewelry. Set in a diamond ring, the length of the pear cut provides a long and slender look to the fingers.

History of the Pear Cut Diamond

The pear cut diamond was created in 1475 and was cut by Lodewyk van Bercken. This makes it a very old cut that was widely used by the elite in necklaces, rings, and even on crowns. The cut is not only suitable for white diamonds, but yellow and red diamonds are also cut in this way.

Ratio of the Pear Cut Diamond

When you buy a pear shaped diamond online pay close this attention to the length width ratio. This largely determines how the stone will look when viewed from above. The most traditional pear shaped diamonds have a length-to-width ratio between 1.45 and 1.75. 

However, some choose a slightly longer, thin shape, while others opt for a somewhat shorter, compact shape. At least as important for a pear shaped diamond is that it is neatly symmetrical in shape.

Choose a pear shaped diamond for its sparkling brilliance. Therefore, choose a stone with the highest possible cutting quality that your budget allows.

Our minimum recommendation for buying pear cut diamonds is as follows (however, these recommendations are no more than our personal opinion, which may differ from your taste or preference):

  • Grinding quality: good
  • Colour: G
  • Purity: SI2
  • Depth %: 56-70%
  • Table %: 53-62%

Pear Cut Diamond Cutting or Sharpening Information

Cutting a pear diamond symmetrically is craftsmanship and few cuts have the right proportion of good symmetry. The shoulders and the bulge at the top should be sharpened nicely. If not, the diamond will become angular at the top. Many diamond polishers try to increase the carat of the diamond with this, but the quality of the curvature is not included in the value of the diamond.

Bow-Tie Effect on Pear Cut Diamonds

If the facets of the diamond are misaligned, the light in the diamond will be blocked. This prevents the light from returning to the outside of the diamond. If this is the case, black triangles appear in the diamond and this is called the Bow-tie effect. This can be solved by grinding an extra facet on the collet of the diamond.

Pear Cut Diamonds in Modern Jewelry

You can find pear cut diamonds in almost all jewelry. But they are most popular in diamond engagement rings, diamond earrings, and diamond necklaces.

Pear Shaped Diamond in Engagement Ring

Pear Cut Diamonds in Ring

While not the most traditional choice, diamond engagement rings with a pear shaped diamond are particularly beautiful. The pear shaped diamond is very popular both in solitaire settings and in settings where the center stone is accentuated by several side stones. 

When worn with the tip pointing towards the nail, the pear cut creates an illusion of longer fingers. However, there are just as many people who prefer to wear their pear-shaped diamond ring with the point towards the wrist.

Pear shaped diamonds can be placed in a ring setting with 3, 5, or 6 feet. Make sure that the pointed corner of the diamond is well protected by one of the metal feet of the jewel so that the chance of breaking is minimal.

The beautiful selection of pear shaped black diamonds and pear cut diamond engagement rings can be found at Gemistone Jewelers.

The pear shaped diamond is based on the traditional setting of round diamonds. More than in other fancy cuts, in pear shaped diamonds the relationship between length and width is a matter of taste.

Pear Cut Diamonds in Earrings

Pear cuts are very popular in earrings. They offer a certain elegance that no other diamond cut can match. They are feminine and romantic. This makes them very suitable for special occasions. But they are also suitable for everyday use.

Pear Cut Diamonds in Necklaces

Pear Cut Diamonds in Necklaces

Like raindrops or teardrops, pear cut diamonds fall naturally. This effect is especially evident with necklaces. The drop accentuates the collarbones. It is the height of sophistication. You already saw it in Elisabeth Taylor’s necklace. But we guarantee it will work with (much) smaller pear cut diamonds too.

Main Stone or Sidekicks

Some diamond cuts are almost always the central stone in a piece of jewelry, for example, oval cut diamonds. I rarely see these as shoulder stones. While other cuts, are used almost exclusively as sidekicks. For instance, the baguette cut diamond. So what about the pear cut diamond? The beauty of a cut pear is that we can use it as a center stone, a solitaire engagement ring, or as a sidekick.

Advantages & Disadvantages of the Pear Cut Diamond

Like any other diamond cut, the pear cut diamond has some pros and cons. Let me summarize what we have explained so far. Roughly speaking, there are 5 advantages and disadvantages of the pear shaped diamond.


In general, we can say that there are five advantages of the pear cut diamond:

  • Price: Pear cut diamonds generally have a lower price than the popular brilliant cuts. You can get a pear cut diamond that is larger, better colored, or purer than a round cut diamond.
  • Size: In addition to generally cost less, the pear also appears larger than a brilliant cut. The pear is about 8% larger in surface area than a round cut.
  • Versatility: As mentioned earlier, the pear cut lends itself to a variety of jewelry. You can wear it as a necklace, in earrings or a ring. In addition, pear cut diamonds can be used as the main stone as well as side stones.
  • Slimming, lengthening, and refining: Many women love the visual effect of the pear cut diamond. In a ring, the pear diamond makes the finger seem longer and slimmer. It emphasizes the collarbones and can stylishly emphasize the bust.
  • Vintage: The pear shape has been around for many centuries. That is why we consider the pear a timeless classic. Specifically for the vintage woman, the pear cut is an all-time favorite.

Cons / Disadvantages

Where there are advantages, there are also disadvantages. Looking at what we know, there are three drawbacks to consider:

  • Expertise is a must: As discussed, symmetry is important for a pear cut diamond. A poorly cut pear loses its symmetry and with it its sparkle. That is why pears must be sharpened by real craftsmen. That’s why we recommend buying pear cut diamonds only from reputable Gemistone jewelers. 
  • Fragile point: The point of a pear cut diamond is very narrow. But it is also a reservoir for types of inclusions. This makes the tip easy to damage. That is why it is important to choose a setting that protects the tip of the diamond cut.
  • Fewer options: A pear cut diamond is less popular than a brilliant cut. On the one hand, it is an advantage because fewer people compete for the same diamond shape. But on the other hand, lower demand also means fewer options.

Famous Celebrity Wearing Pear Cut Engagement Rings

Pear cut diamonds have been widely endorsed by celebrities around the world. Recall Angelina Jolie’s emerald drop earrings from the 2009 Oscars. The appearance of the pear cut dates back to the beginning of this millennium.

However, more recently, many Hollywood celebrities have been seen sporting this cut in their accessories. The following are the most famous pear cut diamond engagement rings seen in the recent past.

Brilliant pear cut with halo by Katherine Heigel:

Is a 3 carat pear cut diamond surrounded by a thin halo with micro pave diamond traces. The ring has a clear Art Deco influence and the French setting band only amplifies the perfection of the design.

Victoria Beckham’s teardrop-shaped pear-cut rock:

One of many whims she’s acquired over the years of her marriage to soccer stud David Beckham, this piece is between 15 and 17 carats, tastefully set in a platinum-banded micro-pave.

Jessica Simpson Accented Pear Cut Engagement Ring:

Jessica Simpson’s 4-carat diamond engagement ring is dazzling, to say the least. Set on a diamond-encrusted band, this is a simple yet eye-catching feature.

Ariana Grande’s pear cut with pave setting ring:

Ariana’s 3.03 carat pear-shaped diamond has a delicate halo and pave band and is set in platinum. Pete had it specially manufactured for her at $93,000 cost, according to reports. Ariana wears her pear-shaped hat with the point side up.

Cardi B’s Pear cut diamond point side up Ring:

Meet Cardi B if you think Ariana’s pear-shaped engagement ring is spectacular. Offset’s ring for the rapper is an eight-carat pear-shaped diamond worth half a million dollars. It has a rose gold halo with two more pears on the side. Cardi wears her pear-shaped hat with the point side up.

Margot Robbie’s Pear Cut Diamond Engagement Ring:

Margot’s pear-shaped engagement ring is significantly more modest, with a pave band estimated to be two carats. Margot, ever the rebel, wears her pear shape with the point down. 

Pear Cut Diamond FAQs:

How to match diamond to pear shaped diamond?

The pear cut is a mix between a marquis cut, like an eye shape, and a brilliant cut. The drop shape, if mounted on a ring, should preferably be worn with the point pointed to the nail, because it makes the fingers appear slimmer.

Why mostly choose a pear cut diamond people?

Although more difficult to cut, the pear shape has some advantages. For instance, with the arrangement of the facets, any inclusions may be more difficult to detect. On the contrary, in diamonds with fewer facets like Asscher or Emerald Cut, the inclusions are much more visible. Pear cut also offers a benefit to those who wear it, as it tends to make your fingers more tapered.

What metals go well with Pear Cut Engagement Rings?

All metals work well with pear cut diamonds, but pear cut diamonds tend to show more color than other cuts. If you want your diamond to have a brighter look, especially if it is set in white, yellow, or rose gold, choose a color of H or higher.

Which setting is optimal for a pear shaped diamond? 

Traditionally, pear diamonds are set in a north-south (vertical) or east-west (horizontal) orientation.

Where to Buy Affordable Pear Cut Diamond Online?

If you’re looking for peace of mind that you’re buying a new high quality and perfect Pear Shaped Diamond, first hand directly from a Gemistone Jewelers Collection Conflict Free Black and White – Diamond Polishers,

This sparkling Pear Shaped Diamond is your best choice, don’t miss this OFFER! Includes, free insured door-to-door Free Shipping, and 30 day hassle-free extended returns.

Leave a Reply

Your email address will not be published. Required fields are marked *

The maximum upload file size: 100 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here