Looking for a ring for a bride or groom, but don’t know the right and Exact size? In this article, we will tell you everything about how to determine the size of rings, what size charts exist, and how to use them correctly. We will also reveal the secrets of how to discreetly pick up a ring for a romantic surprise.
Fingers come in all shapes and sizes, and the same goes for your rings. When you shop online you must know what your ring size is, so that your purchase fits perfectly. Not sure of your ring size?
The average woman’s ring size is somewhere between 50-54, and the average man’s ring size is somewhere between 58-64. You can of course just go to a jeweler to take your size, but you can just as easily determine your size at home using the easy methods of Gemistone!
To help you find the right ring size, we have made the size chart below for you. Many ways are used worldwide to indicate the size of a ring. We adhere to the standards of the half sizes and indicate the ring size as the inner diameter in millimeters.
Why it is important to know ring sizes?
Buying rings is a responsible business, and knowing the required size in advance, will significantly save your time and nerves when looking for jewelry in a jewelry salon or an online store. If you know the exact size of the product, it will fit perfectly and will sit well on your finger without creating discomfort when worn.
There is no general size standard – many states have their gradation for jewelry. For example, domestic manufacturers take the inner diameter of a circle as the basis for determining the size of the rings and in the United States and most European countries, its length is the main indicator.
But it is much easier to use the universal ring size table, which summarizes all the data. In this case, you need to know the size of the finger girth or the correct size of the rings according to USA standards. Look at the Below Internatioanl Ring Size Chart By Gemistone Jewelers.
Easy and Straightforward Methods to Measure your Ring Size
Method 1: Paper Strip
Organize the necessary tools in advance:
STEP 1: Preparation
Prepare the necessary tools in advance: scissors, a ruler, a piece of paper, and a pen. Before measuring your finger, keep the following in mind:
Measure your finger at the end of the day, when it is thickest; after all, the size of our fingers changes during the day.
Measure your finger three to four different times; the thickness changes depending on the temperature – your finger can shrink or expand depending on whether it’s hot or cold. Leave plenty of room for your knuckle.
STEP 2: Wrapping Paper
Cut a strip of paper about 21 cm long and 1.5 cm wide. Wrap the paper close to your knuckle around your finger; this is the thickest part of your finger.
Wrap the paper close to your knuckle around your finger; this is the thickest part of your finger. Don’t wrap the paper too tightly to get a comfortable fit.
Make sure to measure which finger you want to wear the ring on. Mark with a pencil or pen where the strip forms a full circle and begins to overlap.
STEP 3: Measure
Using your ruler, measure from the edge of the paper to the marked line, and round up to the first millimeters; this is the circumference of your finger. Record your measurement on a separate sheet of paper.
STEP 4: Ring Size Guide
Once you’re done measuring, it’s time to find your size! Consult our ring size chart or ring size calculator to find your matching size!
Method 2: Printable Ring Size Chart
To choose a new ring, you need to measure the diameter of the old one as accurately as possible, down to a millimeter, and use a table with parameters.
You will to just take her ring and outline it from the inside in the circles of the Ring Size Chart. This is the easiest way to find out the size of a ring by its diameter. If the diameter of your ring is 17.7 mm, then you need to choose a size 7.5.
Method 3: Diameter Ring Method
You will to just take an Old Ring and Place it over the metric side of the Ruler from Starting Point and Markdown the Numbers. After you will take an International Ring Size Chart and Find out your Markdown Numbers on Diameter mm Column. If your markdown numbers are 1.8 cm then, Diameter mm is 18, which means your size is 8.
Always Choose Higher numbers of your ring size, if you will get numbers between two digits. Do not Choose Lower numbers.
Method 4: Bar of Soap
This is our favorite one! Best and most accurate; when it comes to ring sizing techniques! For this trick, we will need just a bar of soap and an Old Ring.
Just wait for the perfect opportunity; on the table is his favorite ring.
Prepare your soap bar, print the ring on the bar and stick it, put it in a plastic bag, and then, be sure to clean the ring very well using a napkin/towel (and wash it if necessary). Just this. Now, take the magic bar to the jeweler and they can tell you what size you should get.
If you want to Try these above Methods to measure your Ring size at home more accurately and Want to Know it in Better Ways in Visually, then Below is the Best Video For your Example, Let’s look at;